State of the art shielding bschirmung von 5G
In contrast to the very cost-intensive competition, our product is available at a much more affordable price and is therefore available to a wider range of customers. We rely on the graphene technology. We are thus supplementing the market with an product in terms of price and quality, which is in no way inferior to the competition. With our product EMF-TURTAL we use the principle of shielding according to Faraday.
This principle is an arrangement known as a Faraday cage and is used today in electrical engineering for shielding electrostatic fields. Thus EMF-TURTAL successfully shields against 5G, WLAN and other HF and LF loads with 27db-58db. (Measuring protocol EMF-Turtal)
*Ø-value – 29 – 58 dB (differs depending on frequency & layer thickness 200 g/m² to 300 g/m² dry weight).
** at high frequencies of 40 GHz we achieve up to max. 58 dB with 2 layers / 65 dB with 3 layers, see expert opinion (with coated layers at 200 g/m² to 300 g/m² dry weight)
Shielding at the highest level
easy to use
Advantages of EMF-TURTAL PLV
The advantage of EMF-TURTAL PLV, as described above, is among other things the price advantage and the use of advantages and properties of graphene. Since our product has to be mixed with water by the end consumer to be ready for consumption, we have outsourced a complete work step and can set our price considerably lower than the competition. As we use the latest graphene technology, the shielding properties of EMF-TURTAL are at the highest level. We deliberately avoid chemical ingredients such as antifreeze and solvents. A further advantage is that EMF-TURTAL PLV is not temperature-sensitive and therefore does not have to be protected from frost – and can also be shipped in winter without any problems. A further advantage is the low volume and weight of the packaging unit, which keeps shipping costs low.abschirmung von 5G Elektrosmog und Mobilfunk mit Abschirmfarbe.
It is simply mixed with water.
Shielding attenuation: single layer 27 dB, double layer 58 dB.
The shielding attenuation is measured regularly.
General: Our shielding paints based on carbon materials and a new graphene technology have many advantages:
Radio pollution from mobile phones, mobile Internet, G5, WLAN, DECT, GSM, LTE – and many more – are shielded up to 58 dB 2 Layer´s
Electric fields from house current (alternating current) are grounded and can be fully shielded.
We recommend always painting in two coats.
EMF-TURTAL must be earthed!
Range of application (yield): Inside (5-7 m²/ litre)
Substrate: Inside Excellent adhesion to almost all primed substrates as well as old paint coats, plasterboard, wallpaper, plaster, concrete, wood, etc.
Top coat: Can preferably be painted over with plastic-bonded emulsion paints, silicate emulsion paints, facade paints or silicone resin paints. We do not recommend pure mineral paints (clay, lime, pure silicate). Specific product recommendations can be found in the technical data sheet. Due to the high adhesive tensile strength, can be used directly under purely organic plaster, no mineral plaster!
Grounding: Must be earthed! We recommend the earthing band from our shop plus earthing plug for indoor use.
Ingredients: Binders, graphite, carbon, additives.
Technical data: VOC content: 0.2 g/l (the EU limit value for category A/a is 30 g/l from 2010). Adhesive tensile strength: 2.2 N/mm².
Colour: Graphite black.